Toyota Land Cruiser, Amazon, Lexus LX470
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ A power supply system and production of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
- Gear shifting box
- Automatic Transmission (AT)
Failure diagnostics of AT - the general information
Adjustment of draft of gear shifting
Check, adjustment and replacement of the sensor switch of permission of start
Removal and installation of assembly of the lever of the AT selector
Removal and installation of automatic transmission
+ Transfer case
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Removal and installation of assembly of the lever of the AT selector
|
|
1. Remove the top panel of the back console (see the Head Kuzov).
2. Remove handles of switches and dismantle the control panel of heating of seats (see the Head of the Cooling system of the engine, heating of salon and air conditioning).
3. Remove the handle of the lever of switching of the modes of the transfer case.
4. The car also establish to Poddomkratta it on props.
5. Remove a clamp, give a nut of fastening of thirst of gear shifting for the selector lever, do not forget to remove a washer.
6. Disconnect an electrical wiring and turn out bolts of fastening of the basis of assembly of the lever of the selector of transfers.
7. Installation is made upside-down. Track that all fixture was tightened with the required effort. |
|
|
|
