Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 release

Repair and operation of the car

Toyota Land Cruiser, Amazon, Lexus LX470
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
- Power supply system and production of the fulfilled gases
   Dropping pressure in a power supply system
   Check of serviceability of functioning of the fuel pump, measurement of pressure of fuel
   Check of a state and replacement of fuel lines and their nipple connections
   Removal and installation of the fuel tank
   Cleaning and repair of the fuel tank - general information
   Removal and installation of the fuel pump
   Replacement of the sensor of fuel consumption
   Removal and installation of assembly of the air cleaner
   Removal, installation and adjustment of a cable of an accelerator
   System of electronic injection of fuel (EFI) - the general information
   Check of serviceability of functioning of system of electronic injection
   Check of a state and replacement of components of system of injection
   System of release - the general information
   Removal and installation of nozzles
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear shifting box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



General parameters




   Engine 1UZ-FE

Electronic injection (EFI ETCS–i)

   Engine 1HD-FTE

The distributed injection

Petrol models



Pressure of fuel, kgf/cm2

   Ignition is included, the engine does not work

2.7 ÷ 3.1

   The engine works at single turns

      The vacuum hose is disconnected

2.7 ÷ 3.1

      The vacuum hose is connected

2.0 ÷ 2.4

Pressure withheld with istemy food 1.5
Electric resistance of an injector, Ohm 13.4 ÷ 14.2
Electric resistance of the RPM/TDC sensor, Ohm 1630 ÷3225
Electric resistance of the ECT sensor at a temperature of 80 a hail., Ohm 200 ÷ 400

Idling turns

See Settings and routine maintenance of the car

Efforts of tightening of threaded connections, Nanometer

Connection type


Bolts and nuts of fastening of the case of a throttle


Bolt of fastening of the fuel pump to an arm


Bolts of fastening of a forward fuel tube


Manometer adapter bolt in the fuel highway


Nuts of fastening of fuel highways to the inlet pipeline


Accelerator cable arm nuts


Damper of pulsations of fuel
Bolts of fastening back from ideniye
Fuel pressure regulator lock-nut
Clips of nozzles (diesel engine) 25