Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 release

Repair and operation of the car



Toyota Land Cruiser, Amazon, Lexus LX470
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ A power supply system and production of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear shifting box
+ Transmission line
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of forward shock-absorbers
   Removal and installation of the forward stabilizer of cross stability
   Removal and installation of assembly of a rotary fist with a nave
   Check of a state and replacement of spherical support
   Removal and installation of the torsion bars
   Removal and installation of the top managing director of the lever of a forward suspension bracket
   Removal and installation of the lower managing director of the lever of a forward suspension bracket
   Removal and installation of back shock-absorbers
   Removal and installation of a bar of the back stabilizer of cross stability
   Removal and installation of a jet bar
   Removal and installation of a screw spring of a back suspension bracket
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Check of a state, removal and installation of drafts of the steering drive
   Replacement of protective covers of assembly of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Removal of air from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Angles of installation of wheels
+ Body
+ Onboard electric equipment


08d33331



Removal of air from a hydraulic path of system of strengthening of a wheel

 PERFORMANCE ORDER

1. After implementation of any procedures connected with a detachment of lines of system of hydrostrengthening of a wheel it is necessary to remove air from a hydraulic path of GUR. Otherwise efficiency of functioning of the steering amplifier considerably will decrease.
2. Develop forward wheels of the car in rectilinear situation and check liquid level in the GUR system tank (see the Head Nastroyki and routine maintenance of the car). In case of need make the corresponding adjustment (level of liquid has to reach the lower point COLD in a tank wall).
3. Start the engine and leave it working for 1000 rpm. Double-check liquid level in the GUR tank. In case of need again make adjustment.
4. Here and there (without blows in the ends of the course) remove with rotation of a steering wheel from system air (you watch that liquid level in the tank during pumping did not fall below an admissible limit).
5. Having finished pumping, return wheels to rectilinear situation, let's the engine work within several more minutes, then muffle it.
6. Make trial runs of the car, checking serviceability and noiselessness of functioning of steering system.
7. Double-check the level of hydraulic liquid at the engine which is warmed up up to the normal working temperature (this time it has to reach mark NOTES in a tank wall). In case of need make necessary adjustment (see the Head Nastroyki and routine maintenance of the car).