1. Weaken wheel nuts. The car also establish to Poddomkratta it on props. Remove forward wheels.
2. Holding a shock-absorber rod from a provorachivaniye a face key give a fixing nut of the top support of assembly (address an illustration above).
3. Trying to remember the adjusting provision of components, remove rubber plugs and washers.
4. Give a nut of a through bolt of fastening of the lower support of the shock-absorber to the lower lever of a suspension bracket.
5. Turn off bolts of fastening of the lower support of the shock-absorber.
6. Omit assembly down and take it through a wheel arch.
7. Check a condition of rubber plugs of the top support of the shock-absorber, replace defective components.
8. Rock not loaded car from the suspicious shock-absorber down. The car corner with the serviceable shock-absorber after it was released, has to return on the place, without making oscillating motions. The tendency to a swing up-down or inability of the car after couple of nods to return to a starting position hints at the faulty shock-absorber.
9. Installation is made upside-down. Track that all fixture was tightened with the required effort. |
|
