Removal and installation of the lower managing director of the lever of a forward suspension bracket
PERFORMANCE ORDER
1. Cock the parking brake. Weaken nuts of fastening of the corresponding forward wheel. A car front also establish to Poddomkratta it on props. Remove a wheel. 2. At the corresponding complete set remove protection of a case. 3. Remove the torsion bar (see the Section Removal and installation of the torsion bars). 4. Disconnect a rack of a bar of the stabilizer and disconnect the lower fastening of the shock-absorber from the lower lever of a suspension bracket (see the Section Removal and installation of forward shock-absorbers). 5. Disconnect a rotary fist from the lower lever.
6. Give bolts and nuts and remove the lever (address an accompanying illustration).
7. Installation is made upside-down. Tighten all fixture with the required effort.
Tightening of axial bolts / nuts has to be made after lowering of the car on the earth.
