Toyota Land Cruiser, Amazon, Lexus LX470
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
- Settings and routine maintenance of the car
Specifications
Schedule of routine maintenance
General information about settings and adjustments
Check of levels of liquids
Check of a condition of tires and pressure of their rating
Check of level of the AT working liquid
Check of level of liquid of the power steering
Replacement of motive oil and oil filter
Check, service and charging of a battery room
Check of a condition of components of the cooling system
Check of a state and replacement of the hoses located in a motive compartment
Check of a state and replacement of brushes of screen wipers
Rotation of wheels
Check of a condition of components of a suspension bracket and steering drive
Greasing of components of the chassis
Check of a condition of components of system of production of the fulfilled gases
Check of level of lubricant in the transfer case
Check of level of lubricant of differential
Check of a condition of seat belts
Check and adjustment of turns of idling
Check of a condition of protective covers of power shafts
Check and replacement of the valve of system of the operated ventilation of a case (PCV)
Replacement of the filtering air cleaner element
Check of a state, adjustment of effort of a tension and replacement of driving belts
Check of a condition of components of a power supply system
Check of the brake system
Adjustment of height of situation and free wheeling of a pedal of a brake
Check of a state and replacement of spark plugs (petrol engines)
Check and adjustment of gaps of valves
Replacement of the fuel filter
Check and service of the conditioner of air (K/V)
Service of the cooling system
Check of a state, stuffing by lubricant and adjustment of forward naves and wheel bearings
Replacement of ATF of automatic transmission and main transfer
Replacement of lubricant of the transfer case
Differential lubricant replacement
Check of a condition of components of system of catching of fuel evaporations
Check of serviceability of a condition of components of system of recirculation of the fulfilled gases (EGR)
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ A power supply system and production of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear shifting box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Adjustment of height of situation and free wheeling of a pedal of a brake
Height of provision of a pedal
|
|
Height of provision of a pedal is called the size of removal of its block from a floor (address an accompanying illustration). |
If the considered parameter exceeds the limit of admissible range (see Specifications), it is necessary to make the corresponding adjustment (see further).
|
|
|
|
1. Before starting measurement of height of provision of a pedal of a brake make sure that the last is completely released, then start the engine and several times squeeze out the accelerator pedal for the purpose of activation of the vacuum amplifier of brakes. Measure height of provision of a pedal. In case of need make the corresponding adjustment for what weaken a lock-nut and release a lock bolt / датчик-выключатель stoplights, then weaken a lock-nut of a pusher and rotation of a rod of the last bring pedal height to the middle of admissible range (address an accompanying illustration). Do not forget to tighten lock-nuts. |
2. Having finished adjustment of a pedal, screw a lock bolt / датчик-выключатель against the stop it in the lever of pedal assembly (without tightness). |
|
Free wheeling of a pedal
|
|
Free wheeling of a pedal is called the size of its movement from the top point to a point in which there is a feeling of resistance to squeezing (address an accompanying illustration), i.e. prior to activation of the hydraulic drive of the brake system. |
If the result of measurement exceeds the limit of admissible range, it is necessary to make the corresponding adjustment (see further).
|
|
| Before measurement of size of a free wheeling of a pedal of a brake it is necessary to squeeze out it from half-dozen of times at the killed engine. Weaken a lock-nut and achieve the required result rotation of a rod of a pusher. Tighten a lock-nut. |
|
|
|
