1. Make on the car short (duration about 15 minutes) a trip for an oil warming up in the transfer case, whenever possible include the all-wheel drive mode, try to banish the car on all possible high-speed modes, including the movement by a backing.
2. The car also establish to Poddomkratta it on props.
3. Get the drain capacity of suitable volume under the transfer case.
|
|
4. Turn out a drain stopper from the lower part of a case of the transfer case (see an illustration) and merge oil in the prepared container. |
5. After the effluence of oil stops, wipe a stopper, screw it into place and strongly tighten.
6. Turn out a jellied stopper from a box case.
7. Add necessary amount of fresh oil of the required grade in a box, – oil has to begin to follow too much a jellied opening.
8. Screw a stopper into place and strongly tighten. Lower the car on the earth.
9. Make a short trip after which once again check lubricant level in the transfer case on the car. |
|
