Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 release

Repair and operation of the car



Toyota Land Cruiser, Amazon, Lexus LX470
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
- Settings and routine maintenance of the car
   Specifications
   Schedule of routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of the AT working liquid
   Check of level of liquid of the power steering
   Replacement of motive oil and oil filter
   Check, service and charging of a battery room
   Check of a condition of components of the cooling system
   Check of a state and replacement of the hoses located in a motive compartment
   Check of a state and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Check of a condition of components of system of production of the fulfilled gases
   Check of level of lubricant in the transfer case
   Check of level of lubricant of differential
   Check of a condition of seat belts
   Check and adjustment of turns of idling
   Check of a condition of protective covers of power shafts
   Check and replacement of the valve of system of the operated ventilation of a case (PCV)
   Replacement of the filtering air cleaner element
   Check of a state, adjustment of effort of a tension and replacement of driving belts
   Check of a condition of components of a power supply system
   Check of the brake system
   Adjustment of height of situation and free wheeling of a pedal of a brake
   Check of a state and replacement of spark plugs (petrol engines)
   Check and adjustment of gaps of valves
   Replacement of the fuel filter
   Check and service of the conditioner of air (K/V)
   Service of the cooling system
   Check of a state, stuffing by lubricant and adjustment of forward naves and wheel bearings
   Replacement of ATF of automatic transmission and main transfer
   Replacement of lubricant of the transfer case
   Differential lubricant replacement
   Check of a condition of components of system of catching of fuel evaporations
   Check of serviceability of a condition of components of system of recirculation of the fulfilled gases (EGR)
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ A power supply system and production of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear shifting box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


08d33331



Check of level of liquid of the power steering

In difference from the steering mechanism of usual type, in the rack transfer equipped with the hydraulic booster working liquid which begins to need replacement eventually is used.

Location of the tank of GUR liquid is shown on accompanying illustrations in Settings and routine maintenance of the car. The tank is equipped with the screw cover which is turning off counterclockwise.

 PERFORMANCE ORDER

1. Several times turn a steering wheel from an emphasis against the stop then establish forward wheels of the car in rectilinear situation and to kill the engine.
2. In order to avoid hit of dirt in hydraulic system wipe a cover and the surface of the tank with pure rags.
3. Rotating counterclockwise, uncover with the tank equipped with the measuring probe. To the touch estimate temperature moistening liquid probe edge.
4a. Carefully wipe an edge of the probe pure неворсящейся with rags, screw a cover into place, then again remove it and visually determine the liquid level which has to depending on weather conditions be in limits of the corresponding range by the probe (address an accompanying illustration).
4b. On some models the level of working liquid can be estimated through translucent walls of its tank (address an accompanying illustration). Try not to allow a GUR liquid level exit out of limits of the lower bound of admissible range.
5. If necessary liquid is added directly in the tank through a mouth of the last by means of a funnel. Use working liquid only of the recommended grade.
6. If need for adjustment of level of liquid arises regularly and often, check the steering pump, a case of rack transfer, and also all connecting lines of a hydraulic path of the GUR system and their nipple connections for existence of signs of leaks.
7. At the idling engine remember the level of working liquid in a tank.
8. Stop the engine and check distinction in GUR liquid levels at the working and stopped engine. If liquid level considerably changed (more, than on 5 mm), then it is necessary to pump over the GUR system.