1. Make on the car short (duration about 15 minutes) a trip for an oil warming up in differential. The car also establish to Poddomkratta it on props.
2. Get the drain capacity of suitable volume under differential.
|
|
3. Turn out a drain stopper from the lower part of a case of differential (see an illustration) and merge oil in the prepared container. |
4. After the effluence of oil stops, feel a stopper on availability of metal sawdust, podlipshy to it, then wipe it, screw into place and strongly tighten.
|
|
Presence on a stopper of sawdust testifies to wear of internal components of assembly which condition should be checked at the first opportunity. |
5. Turn out from a box case a jellied/control stopper (see the Section Check of Level of Lubricant of Differential). And by means of the manual pump, the syringe or a funnel fill necessary amount of fresh oil of the required grade in differential, – the level of oil has to reach the lower cut of an opening.
6. Screw a stopper into place and strongly tighten. Lower the car on the earth.
7. Make a short trip after which once again check lubricant level in differential on the car. |
|
