Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 release

Repair and operation of the car


Toyota Land Cruiser, Amazon, Lexus LX470
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ A power supply system and production of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear shifting box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of a decorative front grille
   Removal and installation of forward and back bumpers
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of external rear-view mirrors
   Removal, installation and adjustment of doors
   Removal and installation of forward wings
   Removal, installation and adjustment of a door of a back
   Removal and installation flew down also the back door window regulator regulator
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of latches, castle cylinders and door handles
   Removal and installation of a cover of the top hatch with the drive
   Removal and installation of a casing of a steering column
   Removal and installation of the central console
   Removal and installation finishing and main dashboards of sections
   Removal and installation of a lattice of an air inlet of a forward fairing
   Removal and installation of seats
   Removal and installation of an internal rear-view mirror
+ Onboard electric equipment


08d33331


Removal and installation flew down also the back door window regulator regulator

Back door design

1 — the window regulator Regulator
2 — the Right guide of a window regulator
3 — a door Emphasis
4 — Back glass
5 — the Left guide of a window regulator
6 — the door Lock
7 — the Directing tape of facing of a window opening
8 — the External sealing tape

9 — the Cover of a service opening
10 — Plastina
11 — the Cranked lever of the drive of a latch
12 — the lock Cylinder
13 — the Internal sealing tape
14 — the Facing panel of registration plate
15 — the back door upholstery Panel


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. At will the door of a back can be removed from the car (see the Section Removal, installation and adjustment of a door of a back).
3. Remove the loopy poruchnevy handle of a door of a back, Having removed its panel and having turned out a fastening bolt.
4. Release ten clamps of fastening of the panel of an internal upholstery of a door. Disconnect an electrical wiring and turn out screws of fastening of a cover of a service opening (address an illustration above).
5. Shoot the directing film of facing of a window opening of a door of a back.
6. Disconnect the remained electrical wiring, take out glass and remove assembly of the regulator of a window regulator (address an accompanying illustration).
7. Installation is made upside-down.