Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 release

Repair and operation of the car



Toyota Land Cruiser, Amazon, Lexus LX470
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ A power supply system and production of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear shifting box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of a decorative front grille
   Removal and installation of forward and back bumpers
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of external rear-view mirrors
   Removal, installation and adjustment of doors
   Removal and installation of forward wings
   Removal, installation and adjustment of a door of a back
   Removal and installation flew down also the back door window regulator regulator
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of latches, castle cylinders and door handles
   Removal and installation of a cover of the top hatch with the drive
   Removal and installation of a casing of a steering column
   Removal and installation of the central console
   Removal and installation finishing and main dashboards of sections
   Removal and installation of a lattice of an air inlet of a forward fairing
   Removal and installation of seats
   Removal and installation of an internal rear-view mirror
+ Onboard electric equipment


08d33331



Removal and installation of door glasses

In order to avoid receiving cuts of hands about edges of technological openings in a doorframe work in gloves!


 PERFORMANCE ORDER

Lower glass in extreme lower situation. On the models equipped with electrodriving window regulators / the uniform lock disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

Forward doors

 PERFORMANCE ORDER

1. Remove a door rear-view mirror (see the Section Removal and installation of external rear-view mirrors).
2. Remove the panel of an internal upholstery of a door and the moisture filter (see the Section Removal and installation of panels of an internal upholstery of doors).
3. Shoot internal and external sealing films (address the illustration Forward Door and Its Components).
4. Turn off two bolts of fastening of the directing trench of glass and take out glass from a door outside and up. Having hooked a trench, accurately remove it.
5. Installation is made upside-down. Track reliability of a zashchelkivaniye and tightening of fixture.

Back doors

Design of assembly of a back door

1 — Models with the uniform lock
2 — the Door lock
3 — the Fixed back window leaf with a facing sealing tape
4 — Glass
5 — the External sealing tape
6 — the Directing tape of facing of a window opening
7 — the Dividing level
8 — the External handle
9 — the Button of switching off of the lock
10 — the Loop
11 — the Door lock
12 — the Internal sealing tape

13 — the Limiter of opening of a door
14 — the window regulator Regulator
15 — the Cover of a service opening
16 — the Internal handle
17 — the Armrest
18 — the Switch of management of functioning of the electric drive of a window regulator
19 — the Panel of an internal upholstery
20 — Models without electric drive of window regulators
21 — the window regulator Regulator
22 — the Lock ring
23 — the Plug
24 — the regulator Handle


 PERFORMANCE ORDER

1. Shoot internal and external sealing films (address an illustration above).
2. Remove a dividing level, the back fixed window leaf with a sealing facing tape and the directing tape of facing of a window opening.
3. Remove assembly of a latch of the door lock with the external handle (see the Section Removal and installation of latches, castle cylinders and door handles).
4. Remove the window regulator regulator (see the Section Removal and installation of regulators of window regulators).
5. Remove door glass.
6. Installation is made upside-down.