Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 release

Repair and operation of the car

Toyota Land Cruiser, Amazon, Lexus LX470
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ A power supply system and production of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear shifting box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of a decorative front grille
   Removal and installation of forward and back bumpers
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of external rear-view mirrors
   Removal, installation and adjustment of doors
   Removal and installation of forward wings
   Removal, installation and adjustment of a door of a back
   Removal and installation flew down also the back door window regulator regulator
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of latches, castle cylinders and door handles
   Removal and installation of a cover of the top hatch with the drive
   Removal and installation of a casing of a steering column
   Removal and installation of the central console
   Removal and installation finishing and main dashboards of sections
   Removal and installation of a lattice of an air inlet of a forward fairing
   Removal and installation of seats
   Removal and installation of an internal rear-view mirror
+ Onboard electric equipment

Removal and installation of an internal rear-view mirror

Priklenny mirror

PERFORMANCE ORDER

1. If the illumination lamp is provided in a mirror, disconnect a weight wire from the battery.
2. Disconnect the available conducting from a mirror.
3. Undertake more reliably the basis of a mirror and develop it counterclockwise half way.
4. Remove a mirror from glass.
5. Installation is made upside-down.

Privernuty mirror

PERFORMANCE ORDER

1. Accurately hook a slip (at the corresponding complete set) the flat pallet.
2. Remove a rubber damper about mirror drains.
3. Turn out the screw from the basis and remove a mirror.
4. Installation is made upside-down.