Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 release

Repair and operation of the car



Toyota Land Cruiser, Amazon, Lexus LX470
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ A power supply system and production of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear shifting box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of a decorative front grille
   Removal and installation of forward and back bumpers
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of external rear-view mirrors
   Removal, installation and adjustment of doors
   Removal and installation of forward wings
   Removal, installation and adjustment of a door of a back
   Removal and installation flew down also the back door window regulator regulator
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of latches, castle cylinders and door handles
   Removal and installation of a cover of the top hatch with the drive
   Removal and installation of a casing of a steering column
   Removal and installation of the central console
   Removal and installation finishing and main dashboards of sections
   Removal and installation of a lattice of an air inlet of a forward fairing
   Removal and installation of seats
   Removal and installation of an internal rear-view mirror
+ Onboard electric equipment



Removal and installation of seats

Front seats

Electric drive of seats and arrangement of its components


 PERFORMANCE ORDER

1. On the models equipped with electrodriving seats disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove carpets and disconnect an electrical wiring.
3. Uncover a seat sled.
4. Turn out fixing bolts and remove assembly of a seat (address an accompanying illustration).
5. Disconnect the socket from the seat electric drive motor (address an illustration at the beginning of the Section).
6. Give bolts of fastening of the motor to a frame and remove it.
7. Installation is made upside-down. Track reliability of tightening of fixture.

Back seats

 PERFORMANCE ORDER

1. Release locks from two parties of a seatback.
2. Remove slips and turn out bolts of forward fastening of a seat to a floor. To remove a back, turn out bolts of the central loop and axial bolts from two parties. Remove a pillow and a back.
3. Apply sealant in carving openings and establish a pillow and a seatback. Tighten fastening bolts to a floor with the required effort.