Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 release

Repair and operation of the car

Removal and installation of regulators of window regulators

In order to avoid receiving cuts of hands about edges of technological windows in a doorframe work in gloves!

PERFORMANCE ORDER

1. On the models equipped with electrodriving window regulators and the uniform lock disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

2. Remove the panel of an internal upholstery of a door and the film moisture filter (see the Section Removal and installation of panels of an internal upholstery of doors).
3. Remove a windowpane (see the Section Removal and installation of door glasses).

4a. On models with the manual drive of window regulators...

4b.... turn out five fixing bolts (address accompanying illustrations).

4c. For removal of the electrodriving regulator disconnect an electrical wiring and turn out six fixing bolts (address an accompanying illustration) (except the regulator of a window regulator of a back door).

5. For removal of the electrodriving regulator of a window regulator of a back door remove a latch of the lock and the external handle of a door (see the Section Removal and installation of latches, castle cylinders and door handles), then disconnect the corresponding electrical wiring and turn out four fixing bolts (address an accompanying illustration). Take assembly of the regulator from a doorframe.

6. Installation is made upside-down. Do not forget to grease rollers of regulators with universal lubricant. Track reliability of tightening and a zashchelkivaniye of fixture.